ligitek electronics co.,ltd. property of ligitek only super bright round type led lamps doc. no : qw0905-lurf 3333/h0 rev. : a date : 18 - oct - 2005 data sheet lurf3333/h0
25% 75% 100% 25% 50% 0 75% 50% 100% part no. lurf3333/h0 1.0min 25.0min ?? 0.5 typ note : 1.all dimension are in millimeter tolerance is ? 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. -60 x -30 x 0 x directivity radiation 2.54typ + - 60 x 30 x 8.6 5.9 1.5max 7.6 package dimensions 5.0 page 1/4 ligitek electronics co.,ltd. property of ligitek only
algainp lurf3333/h0 red water clear 2.4 1.5 20 630 2200 38 1100 note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. t opr operating temperature j -40 ~ +85 typical electrical & optical characteristics (ta=25 j ) material part no emitted lens color soldering temperature storage temperature tstg tsol forward voltage @20ma(v) max. spectral halfwidth ??f nm dominant wave length f dnm min. viewing angle 2 c 1/2 (deg) luminous intensity @20ma(mcd) min. typ. max 260 j for 5 sec max (2mm from body) -40 ~ +100 j absolute maximum ratings at ta=25 j electrostatic discharge peak forward current duty 1/10@10khz reverse current @5v power dissipation forward current esd ir i fp pd i f parameter part no. lurf3333/h0 symbol 2000 10 130 120 50 v g a mw ma ma urf ratings unit page 2/4 ligitek electronics co.,ltd. property of ligitek only
relative intensity@20ma 600 wavelength (nm) 550 0 700 650 0.5 0.5 relative intensity@20ma normalize@25 j forward voltage@20ma normalize @25 j 20 ambient temperature( j ) fig.5 relative intensity vs. wavelength 1.0 ambient temperature( j ) 0.8 -0 -20 -40 60 40 20 80 100 0 -40 -20 -0 60 40 80 100 fig.4 relative intensity vs. temperature 2.5 1.0 0.9 1.1 1.5 1.0 2.0 fig.3 forward voltage vs. temperature 1.2 3.0 100 relative intensity normalize @20ma forward current(ma) forward current(ma) forward voltage(v) 1.5 1.0 0.1 2.5 2.0 3.0 1.0 10 0 1.0 10 0.5 1.0 1.5 2.0 100 1000 fig.2 relative intensity vs. forward current fig.1 forward current vs. forward voltage 1000 3.5 2.5 typical electro-optical characteristics curve ligitek electronics co.,ltd. property of ligitek only 3.0 urf chip 3/4 page part no. lurf3333/h0
the purpose of this test is the resistance of the device under tropical for hous. high temperature high humidity test 1.ta=65 j? 5 j 2.rh=90 %~95 % 3.t=240hrs ? 2hrs solderability test solder resistance test thermal shock test 1.t.sol=230 j? 5 j 2.dwell time=5 ? 1sec this test intended to see soldering well performed or not. 1.t.sol=260 j? 5 j 2.dwell time= 10 ? 1sec. 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. reliability test: part no. lurf3333/h0 low temperature storage test high temperature storage test operating life test test item 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. test condition description mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202:103b jis c 7021: b-11 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 reference standard page 4/4 ligitek electronics co.,ltd. property of ligitek only
|
